360 Watts/600 VA, input 120V/ output 120V, USB
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Boost and Trim
Gives higher application availability by correcting low and high voltage conditions without using the battery.
Automatic Voltage
Regulation (AVR)
LED status indicators Quickly understand unit and power status with visual indicators.
Lightning and Surge Protection Protection from surges, spikes and even lightning is guaranteed!
Resettable circuit breaker Instead of a hard to find fuse, there is a push-button circuit breaker for easy recovery from an overload or short circuit.
Audible alarms Proactively notifies you of changing UPS and utility power conditions.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Transformer Block Spacing Designed to allow the use of up to two transformer block plugs without blocking access to other receptacles.
APC BE600-LM, 0.6 kVA, 60 Hz, 450 J, 40 dB, Sealed Lead Acid (VRLA), 16 h
APC BE600-LM. Output power capacity (VA): 0.6 kVA, Input frequency: 60 Hz, Surge energy rating: 450 J. Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 16 h. Cable length: 1.83 m. Width: 280 mm, Depth: 187 mm, Height: 102 mm. Host interface: USB, Output connections: 2P+T, Input connection type: NEMA 5-15P