ETERNUS DX60 - 900GB (2x 450GB) SAS 15000rpm HDD, 800 MHz CPU, 1GB Cache, Gigabit Ethernet

The Data Safe
With three different base models, ETERNUS DX60 entry level disk storage systems can either connect to hosts via Fibre Channel, iSCSI or SAS.
They are easy to install, configure, operate and maintain, integrating well with host operating systems, servers, network infrastructures and backup solutions. Different drive types can be mixed and matched, secured by the relevant monitored RAID levels (0, 1, 5, 1+0, 5+0 and 6) and features to ensure data integrity. Administrators can dynamically move data, spin disks down to save energy or encrypt disks to prevent unauthorized access. In the event of power outages, the content of the cache is secured to flash memory. A backup copy is always at hand via snapshots and clones.

The energy saving storage device can be scaled from 600 GB to 24 TB and is equipped with all state-of-the-art capacities of high-performance SAS and large capacity Nearline SAS Disks.

The standard system is delivered with 8 snapshots and can be extended to 512 snapshots. The ETERNUS DX60 is equiped with either four 4 Gbit/s Fibre Channel, 1 Gbit/s iSCSI or 3 Gbit/s SAS host ports on two controllers with overall 2 GB cache. The Fibre Channel or iSCSI model can connect up to 64 servers in SAN mode.

Fujitsu ETERNUS DX DX60, 0.9 TB

Fujitsu ETERNUS DX DX60. Total installed storage capacity: 0.9 TB, Storage drive capacity: 450 GB, Storage drive interface: Serial Attached SCSI (SAS). Processor frequency: 0.8 GHz. Compliance industry standards: IEEE802.3, IEEE802.3u, IEEE802.3ab, Cabling technology: 10/100/1000Base-T(X). Noise level: 42 dB, Management protocols: SNMP, SMI-S. Power consumption (typical): 800 W